LED School Zone Sign
LED School Zone Sign also known as LETS ( LED-embedded static traffic signs) School Zone sign has flashing LED’s built-in to the front of the sign to make it easier to see in all conditions
- Description
- Additional information
- Sign Materials
Description
LED School Zone Sign also known as LETS ( LED-embedded static traffic signs) School Zone sign has flashing LED’s built-in to the front of the sign to make it easier to see in all conditions. The flashing LED’s are an effective way to increase the visibility and recognition of the sign – When used with the push-button activation or programmable timer, the sign no long falls into the background but stands out among other signs and distractions in the area.
The standard version of the sign is set to flash 24 hours a day with a flash rate of 50-60 times per minute.
Sign Size(s) : 30″, 36″
Light Size : 1 1/4″ White – 4 G2 LED Lights (For 24″) and 1 1/4″ White – 8 G2 LED Lights (For 30″, 36″, 48″)
Power Type : Solar Power / 12 volt – 20 watts
Sheeting : Reflective Sheeting Type XI – 3M Diamond Grade DG3 or Avery Dennison T-11500 Omni-Cube Series
Illuminated Stop : No
Activation Type : Always On 24 hour flash, Optional ‘Push Button’ activation, Programmable Timer
Additional information
Sign Size | |
---|---|
Power | |
color |
Reflective Sheeting Types
DG Highest Visibility (Fluorescent)
The highest level of reflectivity. Up to 10X brighter than Engineer-Grade Prismatic. Offers great visibility and reflectivity from distances and wide angles, both day at night.
Meets or Exceeds ASTM D 4956, Type IX or Type XI
Related Terms:
HIP High-Intensity Prismatic
3X brighter than Engineer-Grade Prismatic. Effective for daytime, nighttime and artificial light conditions. Provides durability and long-term reflectivity.
Meets ASTM D 4956, Type III, Type IV.
Related Terms:
ENG Engineer Grade
Economical prismatic sheeting provides better day and nighttime brightness and is recommended for commercial sign applications as well as non-critical traffic control signs, regulated by the MUTCD.
Meets ASTM D 4956 Type I
Related Terms:
Substrate Material Types
Aluminum Blanks
Aluminum sheeting meets or exceeds ASTM 5052-H38 specifications and is .081" thick. Traffic signs use this specification to meet Transportation Standards, unless otherwise stated for non-critical traffic signage or commercial applications. All aluminum blanks come with pre-drilled holes for mounting, and rounded corners.
Meets or Exceeds ASTM 5052-H38, 0.081" Thickness
Crezone (HDO) Wood
Crezone HDO (High Density Overlaid) board is extremely durable exterior type plywood with a weather-resistant resin overlay bonded to the wood by heat and pressure. This process fuses the molecules of the overlay with the fibres of the wood to form a bond as strong as the wood itself. In many instances, overlaid HDO plywood has proven a more durable sign material than metal. HDO plywood is resistant to the elements with no danger of rust or corrosion. It is typically used for larger signs, or uncommon sizes made-to-order.
Meets Transportation Material Standards
Related products
-
No U-Turns
$87.00 – $115.00RB-16 No U-Turns Traffic Sign
Select options -
Blinking LED Stop Sign
Blinking LED Stop Sign are properly known as LED-embedded static traffic signs (LETS) on Canadian roads. The conspicuity of a static traffic sign can be increased by embedding light emitting diodes (LEDs) on the sign face.
-
LED Pedestrian Crossing Sign
LED Pedestrian Crossing Sign has flashing LED’s (Light Emitting Diode’s) built-in to the sign to make it easier to see in all conditions. The sign stands out from other signs and is great for use in problem areas where a typical sign isn’t being properly observed
-
No Parking
$30.00 – $115.00RB-51 No Parking Traffic Sign
Select options