LED Maximum Speed Limit Sign
LED Speed Limit Sign can be used in problem areas to take an extra step to make signs more visible to drivers. Our Flashing Speed Limit signs have LED’s built in to the face of the sign and flash 24 hours a day, greatly increasing the noticeability of the sign. You can customize the speed limit on the sign for use in your area.
- Description
- Additional information
- Sign Materials
Description
LED Speed Limit Sign can be used in problem areas to take an extra step to make signs more visible to drivers. Our Flashing Speed Limit signs have LED’s built in to the face of the sign and flash 24 hours a day, greatly increasing the noticeability of the sign. You can customize the speed limit on the sign for use in your area.
Sign Size(s) : 18″x24″, 24″x30″, 30″x36″, 36″x48″
Light Size : 1 1/4″ White – 6 G2 LED Lights (For 24″) and 1 1/4″ White – 8 G2 LED Lights (For 30″, 36″, 48″)
Power Type : Solar Power / 12 volt – 20 watts
Sheeting : Reflective Sheeting Type XI – 3M Diamond Grade DG3 or Avery Dennison T-11500 Omni-Cube Series
Illuminated Stop : No
Activation Type : Always On / 24 hours / Flash Rate 50 to 60 times per minute
Reflective Sheeting Types
DG Highest Visibility (Fluorescent)
The highest level of reflectivity. Up to 10X brighter than Engineer-Grade Prismatic. Offers great visibility and reflectivity from distances and wide angles, both day at night.
Meets or Exceeds ASTM D 4956, Type IX or Type XI
Related Terms:
HIP High-Intensity Prismatic
3X brighter than Engineer-Grade Prismatic. Effective for daytime, nighttime and artificial light conditions. Provides durability and long-term reflectivity.
Meets ASTM D 4956, Type III, Type IV.
Related Terms:
ENG Engineer Grade
Economical prismatic sheeting provides better day and nighttime brightness and is recommended for commercial sign applications as well as non-critical traffic control signs, regulated by the MUTCD.
Meets ASTM D 4956 Type I
Related Terms:
Substrate Material Types
Aluminum Blanks
Aluminum sheeting meets or exceeds ASTM 5052-H38 specifications and is .081" thick. Traffic signs use this specification to meet Transportation Standards, unless otherwise stated for non-critical traffic signage or commercial applications. All aluminum blanks come with pre-drilled holes for mounting, and rounded corners.
Meets or Exceeds ASTM 5052-H38, 0.081" Thickness
Crezone (HDO) Wood
Crezone HDO (High Density Overlaid) board is extremely durable exterior type plywood with a weather-resistant resin overlay bonded to the wood by heat and pressure. This process fuses the molecules of the overlay with the fibres of the wood to form a bond as strong as the wood itself. In many instances, overlaid HDO plywood has proven a more durable sign material than metal. HDO plywood is resistant to the elements with no danger of rust or corrosion. It is typically used for larger signs, or uncommon sizes made-to-order.
Meets Transportation Material Standards
Related products
-
LED School Zone Sign
LED School Zone Sign also known as LETS ( LED-embedded static traffic signs) School Zone sign has flashing LED’s built-in to the front of the sign to make it easier to see in all conditions
-
No Parking
$30.00 – $115.00RB-51 No Parking Traffic Sign
Select options -
No U-Turns Tab
$42.00 – $57.00RB-16-T No U-Turns Tab Traffic Sign
Select options -
LED Pedestrian Crossing Sign
LED Pedestrian Crossing Sign has flashing LED’s (Light Emitting Diode’s) built-in to the sign to make it easier to see in all conditions. The sign stands out from other signs and is great for use in problem areas where a typical sign isn’t being properly observed