SafeZone Dual Spring Wind Stand
$339.00
also Available To Rent
SafeZone Single Spring Wind Stand
- Description
- Additional information
- Sign Materials
Description
Safety Bright orange, powder coated legs allow the sign stand to be seen from highways to city sidewalks.
Dual Spring
These specially designed heavy-duty springs will give you years of use without developing any memory or sag.
Crash Test Proven Dual Breakaway System
The SZ-412-2S’s new breakaway base is the first of its kind. The revolutionary breakaway base can be hit from any direction.
Visibility
The SZ-412-2S sign stand holds rigid or roll-up signs 12” above the ground for maximum visibility. This height meets the minimum height requirement as set forth in the MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
Safety
Bright orange, powder coated legs allow the SZ-412-2S sign stand to be seen from highways to city sidewalks.
Easy Storage
Measuring 7”x 11.25”x 58” when folded for storage, the SZ-412-2S specially engineered to weight only 37 lbs when rigid mast and both sign brackets are attached.
Snap Release Mast
The improved snap release mast can be quickly removed for storage. Designed for rigid signs up to 48”x60”. Roll up brackets also available to hold roll up signs.
Pull Pin/Kick Release Levers
The dual pull pin/kick release lever allows each leg to be deployed by either pulling the pin by hand or by stepping on the kick release at the user’s option.
Nut and Bolt Construction
Readily available replacement parts and simple nut and bolt construction allow for fast repairs for worn or damaged parts. Component parts can be replaced easily in the field, using simple hand tools!
Additional information
Weight | 30.00 lbs |
---|---|
Dimensions | 18 × 10.75 × 8.75 cm |
Reflective Sheeting Types
DG Highest Visibility (Fluorescent)
The highest level of reflectivity. Up to 10X brighter than Engineer-Grade Prismatic. Offers great visibility and reflectivity from distances and wide angles, both day at night.
Meets or Exceeds ASTM D 4956, Type IX or Type XI
Related Terms:
HIP High-Intensity Prismatic
3X brighter than Engineer-Grade Prismatic. Effective for daytime, nighttime and artificial light conditions. Provides durability and long-term reflectivity.
Meets ASTM D 4956, Type III, Type IV.
Related Terms:
ENG Engineer Grade
Economical prismatic sheeting provides better day and nighttime brightness and is recommended for commercial sign applications as well as non-critical traffic control signs, regulated by the MUTCD.
Meets ASTM D 4956 Type I
Related Terms:
Substrate Material Types
Aluminum Blanks
Aluminum sheeting meets or exceeds ASTM 5052-H38 specifications and is .081" thick. Traffic signs use this specification to meet Transportation Standards, unless otherwise stated for non-critical traffic signage or commercial applications. All aluminum blanks come with pre-drilled holes for mounting, and rounded corners.
Meets or Exceeds ASTM 5052-H38, 0.081" Thickness
Crezone (HDO) Wood
Crezone HDO (High Density Overlaid) board is extremely durable exterior type plywood with a weather-resistant resin overlay bonded to the wood by heat and pressure. This process fuses the molecules of the overlay with the fibres of the wood to form a bond as strong as the wood itself. In many instances, overlaid HDO plywood has proven a more durable sign material than metal. HDO plywood is resistant to the elements with no danger of rust or corrosion. It is typically used for larger signs, or uncommon sizes made-to-order.
Meets Transportation Material Standards
Related products
-
Standard FlexPost Unit, galv. (6′ or 8′)
Can be mounted to Concrete, Asphalt, Ground, or by using Adhesive.
-
FlexPost-Rigid (6′ or 8′)
Can be mounted to Concrete, Asphalt, Ground, or by using Adhesive.
-
FlexPost-XL Sign Post (6′, 8′, or 9′)
Can be mounted to Concrete, Asphalt, Ground, or by using Adhesive.
-
FlexPost Guidepost / Delineator w/ Metal Spring (40″ X 4″ X 1 3/8″)
$205.99Can be mounted to Concrete, Asphalt, Ground, or by using Adhesive.
Add to cart